The No-Dig Solution For Pipe Repair
QUICK-LOCK is the only internal pipe repair system made of V4A high-grade Stainless Steel with EDPM compressed rubber seal.
Positioned by a crawler and expanded pneumatically, Quick-Lock’s rehab sleeve provides structural, trenchless pipe repair with heavy-gauge 316L stainless steel, plus infiltration abatement with an EPDM rubber gasket. Quick-Lock solves:
Holes and Separated or Offset Joints.
Installs in minutes with minimal manpower and overhead. Quick-Lock is chemically resistant against sewage, thinned acids, lye, and aromatic and chlorinated hydrocarbons.
Quick-Lock sleeves are available in diameters ranging 6–32”, and in lengths of 16”, 19″ and 20”.
Multiple sleeves can be interleaved to perform longer repairs.
The sleeve design meets ASTM F3110-14 for mechanical trenchless point repair.
Point Repair: For standalone point repair, or for pre-lining under high infiltration, Quick-Lock sleeves restore a pipe’s structural integrity and seal out groundwater. They minimize diameter loss and outlast any other rehab.
Liner End Seal: Quick-Lock end caps strengthen a CIPP liner at its most vulnerable points—the ends. Stronger and easier to install than other end caps, they’re a must-have insurance policy for installed CIPP.
How does it work?
A sleeve is inserted into the damaged pipe section and expanded with the QUICK-LOCK packer, physically pressing the rubber seals against the inner wall of the pipe, instantly sealing out all infiltration. Once the QUICK-LOCK sleeve has been expanded to the correct pressure it is mechanically locked in position with the patented locking system which ensures that the sleeve stays permanently in position. The QUICK-LOCK System is suitable for all forms of pipe and surfaces and, since it works completely via mechanical means, no chemicals, resins or glues are required.
Sleeves are available for nearly all standard pipe sizes. For repairs in longer damaged pipe sections, the QUICK-LOCK sleeve can be interconnected forming one continuous sealed pipe. And, the QUICK-LOCK sleeve has its own static capability and is, therefore, able to absorb the natural tectonic movements of the pipe.